View previous topic :: View next topic |
Author |
Message |
jimmybond *******
Age: 43 Zodiac: Joined: 05 May 2009 Posts: 4170 Location: bury st edmunds
|
Posted: Wed May 08, 2013 10:28 Post subject: |
|
|
Lee is just re read.
Sorry for not clearing this up earlier.
Are you saying with the wire off it sits on quarter. |
|
Back to top |
|
|
Google Sponsor
|
Posted: Wed May 08, 2013 10:28 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
leepeet69 *
Age: 37 Zodiac: Joined: 19 Sep 2009 Posts: 35 Location: MATLOCK DERBYSHIRE
|
Posted: Wed May 08, 2013 10:32 Post subject: |
|
|
I will double check temp sensor with Mitsubishi make sure they have given me the correct one! I don't think the engine has
Problems, also I have no record of the water pump been changed so for piece of mind I fitted a new one so I know it's pumping and not to take notice of the guage till I get it working rite!
Yes with the wire removed from the sensor the guage reads about a quarter |
|
Back to top |
|
|
leepeet69 *
Age: 37 Zodiac: Joined: 19 Sep 2009 Posts: 35 Location: MATLOCK DERBYSHIRE
|
Posted: Wed May 08, 2013 10:33 Post subject: |
|
|
Just rang Mitsubishi parts and they say I have the rite sensor! |
|
Back to top |
|
|
jimmybond *******
Age: 43 Zodiac: Joined: 05 May 2009 Posts: 4170 Location: bury st edmunds
|
Posted: Wed May 08, 2013 10:37 Post subject: |
|
|
Ok for get the sensor, it has to be guage. |
|
Back to top |
|
|
leepeet69 *
Age: 37 Zodiac: Joined: 19 Sep 2009 Posts: 35 Location: MATLOCK DERBYSHIRE
|
Posted: Wed May 08, 2013 10:40 Post subject: |
|
|
Ok well I could try removing guage/clocks and then putting a wire direct from the guage to the sensor to Eliminate the wiring, before I go and buy a new guage or set of clocks! Can I just change the guage or do I need the complete dash clocks? |
|
Back to top |
|
|
jimmybond *******
Age: 43 Zodiac: Joined: 05 May 2009 Posts: 4170 Location: bury st edmunds
|
Posted: Wed May 08, 2013 10:43 Post subject: |
|
|
I dont know, I think another set of clocks.
The wire can be tested with meter but I think your wasting your time.
Start with whats wrong and work bk.
So far its your gauge.
You can fit another universal guage and leave yours as it is. |
|
Back to top |
|
|
leepeet69 *
Age: 37 Zodiac: Joined: 19 Sep 2009 Posts: 35 Location: MATLOCK DERBYSHIRE
|
Posted: Wed May 08, 2013 10:47 Post subject: |
|
|
Ok ill try and aquire a set of clocks! |
|
Back to top |
|
|
leepeet69 *
Age: 37 Zodiac: Joined: 19 Sep 2009 Posts: 35 Location: MATLOCK DERBYSHIRE
|
Posted: Wed May 08, 2013 10:58 Post subject: |
|
|
How much would you say for a second hand set of clocks? Local breaker wants £100! Also is the milage saved on the clocks or ECU?? |
|
Back to top |
|
|
|