The Mitsubishi Pajero Owners Club®

rubs65

Hi All
Hopefully someone out there can shed some light for me ,I have an issue with my dash dial fan setting it doesn't turn on/run when I turn the dial , the aircon comes on as normal so no issue's there , have checked the fuses and nowt wrong there either is there a hidden fuse that I haven't found im flummoxed:( , if anyone else has had the same issue and sorted could you please enlighten me too lol Smile

cheers all ..

Google · Sponsor

rubs65 · Posted: Wed Dec 17, 2014 23:17 Post subject:

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
ANYONE ???

jimmybond · Posted: Sun Dec 21, 2014 10:40 Post subject:

Are you saying that aircon comes on as normal you turn fan on but fan not blowing?

rubs65 · Posted: Fri Dec 26, 2014 16:21 Post subject:

Yes that's correct Smile

or

have checked fuses and all ok .

Jutwit · ***** Joined: 21 May 2013 Posts: 543 Location: South wales

Did it stop suddenly or did it not work on some of the blower speeds? There's a resistor that can go kaput but it usually breaks down over time, meaning you lose the lower speeds first usually, if it stopped suddenly, switch faulty, loose wire, don't know where the heater is located on yours but on mk2 it's in passenger footwell, someone's foot might of knocked a wire off.

jimmybond · Posted: Sat Dec 27, 2014 9:27 Post subject:

Jutwit beat it me to it.
but on a mk3 the type it uses I have known them to wipe the fan out completely.
Also I remember the unit is in the fan housing.
1st put a 12v power to fan if it works just change resistor.

jimmybond · Posted: Sat Dec 27, 2014 9:28 Post subject:

Sorry, the resistor that is.

rubs65 · Posted: Tue Dec 30, 2014 22:11 Post subject:

Ok guys thanx a lot will take a look and see wot happens will keep ya posted Smile

rubs65 · Posted: Sun Jan 04, 2015 23:46 Post subject:

Right guys update on my problem , I have ordered a new heater rheostat so will see wot this does and will let ya know how things turn out .. Watch this space ????

rubs65 · Posted: Thu Nov 19, 2015 21:29 Post subject:

We'll have found out this is not the problem have taken out the heater blower motor and function tested it and it works , also changed the resistor/rheostat and no luck so I function tested that to and all good so now I am thinking its a heater blower relay problem but am not sure which one or where it is as I don't have a manual for my paj , if anyone can shed any light I would be most appreciative ..