|
The Mitsubishi Pajero Owners ClubŪ The Mitsubishi Pajero, Shogun, Montero, Challenger, Raider and EVO 4x4 Owner's Club
|
View previous topic :: View next topic |
Author |
Message |
hutchy ********
Age: 51 Zodiac: Joined: 03 May 2004 Posts: 5010 Location: somewhere on earth
|
Posted: Thu Nov 06, 2014 20:59 Post subject: 51 space star |
|
|
my mates wifes space star has thrown a wobble it started fine got to the shops then would not start,the key turns but no crank battery voltage fine,put a code reader on it came up p0335 which is crank sensor along with rear oxygen sensor code p0421....but surely the crank sensor wouldn,t stop the starter from engaging....cleared the codes and managed to bump start it straight off no bother no fault codes showing yet.. anyone have any idea,s i am thinking ignition switch |
|
Back to top |
|
|
Google Sponsor
|
Posted: Thu Nov 06, 2014 20:59 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
waynec LifeTime Member
Age: 46 Zodiac: Joined: 05 Nov 2007 Posts: 1882 Location: Pembrokeshire
|
Posted: Sun Jan 18, 2015 0:01 Post subject: |
|
|
No, the crank sensor won't stop the starter, sounds like a starter issue 2 me.... |
|
Back to top |
|
|
peteinchad LifeTime Member
Joined: 07 Jan 2013 Posts: 15079 Location: UK
|
Posted: Sun Jan 18, 2015 3:38 Post subject: |
|
|
Try a voltmeter on the small wire to the starter solenoid - if no voltage there when key is turned then either switch or wiring. If there is voltage then starter motor or solenoid. |
|
Back to top |
|
|
hutchy ********
Age: 51 Zodiac: Joined: 03 May 2004 Posts: 5010 Location: somewhere on earth
|
Posted: Sun Jan 18, 2015 13:05 Post subject: |
|
|
the starter was changed we tested the signal wire from the ignition to starter and it was fine..put my power probe straight onto the starter connector and nothing...so starter was changed and has been fine for 1 week and started doing the same...i,m now looking at the imobiliser side as they do have problems but someone has fitted a toad alarm in and we are stuggling to work out what they have done...i don,t think they bypassed the original system but added onto it,so we are trying to figure out how to bypass it altogether and rewire the toad so it still has some sort of security...but we need to bypass the original imobiliser first |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|