Help the Club - Click to Buy!

The Mitsubishi Pajero Owners ClubŪ
The Mitsubishi Pajero, Shogun, Montero, Challenger, Raider and EVO 4x4 Owner's Club
 
The POCUK - it's not just a Club, it's a way of life!

 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
Click here to link to the Pajero Owners Club UK FaceBook Group!POCUK FaceBook Group  POCUK home pagePOCUK Home  POCUK ForumsPOCUK Forums  CalendarCalendar

Shogun 3.5 gdi non starter


 
Post new topic   Reply to topic    The Mitsubishi Pajero Owners ClubŪ Forum Index -> Petrol model specific Q&A
View previous topic :: View next topic  
Author Message
Simotoguzzi
Newbie
Newbie


Age: 50
Zodiac: Aquarius
Joined: 02 Jul 2015
Posts: 1
Location: Glossop

PostPosted: Thu Jul 02, 2015 21:18    Post subject: Shogun 3.5 gdi non starter Reply with quote

Hi I'm after some advice regarding 3.5 gdi engine. I've worked on quite a few 3.2 diesel did engines and always managed to eventually fix them but this 3.5 gdi has got me stuck. I purchased the car as a non starter poss fuel starvation. I will list what I've been through, new lp fuel pump, micro filters in hp pump, hp pump seems to be building up pressure( plugged into diagnostic and on cranking live data shows fuel pressure sensor rise to approx 4.5) no error codes stored! Timing is spot on checked and rechecked. Removed inlet manifold and de coked manifold and inlet ports until they are pristine. Good spark on all 6 cylinders. So finally today connected a noid led pulse sensor to each injector and this is where I'm stuck. Tested each injector and result was... No 1 injector no pulse, 2,3,4,5&6 one single pulse on cranking then nothing! Anyone any ideas before I start changing stuff would be appreciated. Many thanks
Back to top
View user's profile Send personal message
Google
Sponsor







PostPosted: Thu Jul 02, 2015 21:18    Post subject: Google Ads keep the POCUK free to join!


Back to top
radiomike
******
******




Joined: 04 Aug 2010
Posts: 1483
Location: North Bucks

PostPosted: Tue Jul 21, 2015 12:44    Post subject: Reply with quote

If I am reading that correctly you have 4.5 bar HP pressure??  If so how would you get any injection when the cylinder pressure is circa 12 bar?
Back to top
View user's profile Send personal message
Display posts from previous:   
Post new topic   Reply to topic    The Mitsubishi Pajero Owners ClubŪ Forum Index -> Petrol model specific Q&A All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum


All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2002 phpBB Group