View previous topic :: View next topic |
Author |
Message |
gnugfur Newbie
Age: 40 Zodiac: Joined: 19 Jan 2016 Posts: 5 Location: Norway
|
Posted: Tue Jan 19, 2016 16:23 Post subject: no air in air vents |
|
|
Hello.
I have this problem where my airfan for the climate is blowing as hard as it can but no air is getting to the vents.
I've ripped down the intake for the fan and there is a clear opening to the outside with no blockage. I dont want to rip down too much on the
delivery side before i get abit more knowledge about how this is buildt up.
[youtube]d9VKrnLGhSU[/youtube]
Any suggestions? |
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Jan 19, 2016 16:23 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
KEVINBUK ******
Age: 67 Zodiac: Joined: 05 Nov 2004 Posts: 2001 Location: SW Northumberland
|
Posted: Tue Jan 19, 2016 18:00 Post subject: |
|
|
Hi, what model and year do you have?
K |
|
Back to top |
|
|
gnugfur Newbie
Age: 40 Zodiac: Joined: 19 Jan 2016 Posts: 5 Location: Norway
|
Posted: Tue Jan 19, 2016 18:11 Post subject: |
|
|
Hello.
1994 2.5td. .
I'd show you a picture but the anti-spam is making it difficult for me. |
|
Back to top |
|
|
KEVINBUK ******
Age: 67 Zodiac: Joined: 05 Nov 2004 Posts: 2001 Location: SW Northumberland
|
Posted: Tue Jan 19, 2016 18:27 Post subject: |
|
|
When you change from air to the screen to air to the footwell can you hear any motors working in the dash? There are small motors to change damper positions, I am wondering if these have lost power in the closed position?
K |
|
Back to top |
|
|
gnugfur Newbie
Age: 40 Zodiac: Joined: 19 Jan 2016 Posts: 5 Location: Norway
|
Posted: Tue Jan 19, 2016 18:31 Post subject: |
|
|
you sure about that? i've pulled out the control panel for the climate. And its all wires.
I have pulled off the wires and tried moving the pltes manually. Still no air coming out. And i can tell that the fan is doing its job by holding my hand in front of it. |
|
Back to top |
|
|
KEVINBUK ******
Age: 67 Zodiac: Joined: 05 Nov 2004 Posts: 2001 Location: SW Northumberland
|
Posted: Tue Jan 19, 2016 19:00 Post subject: |
|
|
Hmmm... To be honest I'm going by what I saw on my 93 2.8 when I stripped it. Perhaps the 2.5 is different ? On mine there were small motors which operated linkages that opened or closed flaps to divert the air around the ducts. Perhaps someone will be along with a diagram of your arrangement?
K |
|
Back to top |
|
|
gnugfur Newbie
Age: 40 Zodiac: Joined: 19 Jan 2016 Posts: 5 Location: Norway
|
Posted: Tue Jan 19, 2016 22:27 Post subject: |
|
|
got abit cold to be out in -10c. Found the 20kw gasheater and will try again tomorrow. Also got a hold of a inspection camera that i can go into the ducts with. |
|
Back to top |
|
|
gnugfur Newbie
Age: 40 Zodiac: Joined: 19 Jan 2016 Posts: 5 Location: Norway
|
Posted: Sun Jan 24, 2016 1:13 Post subject: |
|
|
OK, fans not blowing as much as i'd like too. Video inspection shows that my vents are all clean and free.
Getting ANOTHER fan. |
|
Back to top |
|
|
|