|
The Mitsubishi Pajero Owners ClubŪ The Mitsubishi Pajero, Shogun, Montero, Challenger, Raider and EVO 4x4 Owner's Club
|
View previous topic :: View next topic |
Author |
Message |
blake Newbie
Joined: 22 Oct 2016 Posts: 2 Location: Aberdeenshire
|
Posted: Sat Oct 22, 2016 20:48 Post subject: Newbie with MkII some issues |
|
|
I'm Blake and from Aberdeenshire
Picked up a Pajero 1995 2.8TD LWB manual limited edition today, on the test drive everything seemed fine there was mention of the rev counter not working some times.
On the way home the speedo stopped working or would go all over the shop and the rev counter would work fine or not work at all (gearbox speed sensor/ dodgy wire?)
Also the central locking went a bit mad while driving with opening and closing itself quite a few times any ideas bad ground maybe?
If anyone has any ideas let me know cheers.
Other than that seems mechanically sound. It needs a general tidy up, powder coat the bull bar black wire up some spots or lightbar |
|
Back to top |
|
|
Google Sponsor
|
Posted: Sat Oct 22, 2016 20:48 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
Simon_W *******
Joined: 21 May 2013 Posts: 4881 Location: Watford
|
Posted: Sat Oct 22, 2016 22:49 Post subject: |
|
|
Hi and welcome
There's lots of info on here about dodgy speedos and rev counters. I'd suggest that you have a search using the box in the top left corner.
Some Pajeros have speed converters, so it may be worth pulling the instrument panel out and having a look for loose wires. If there is a converter, I guess you could disconnect it and see if that makes a difference to the steadiness of the output.
I think the rev counter is driven from a sender on the fuel pump, so have a look for poor connections/broken wiring etc.
Good luck. With a little patience and a lot of perseverence I am sure you will find and fix it. Have you got a workshop manual? They are invaluable. |
|
Back to top |
|
|
blake Newbie
Joined: 22 Oct 2016 Posts: 2 Location: Aberdeenshire
|
Posted: Tue Oct 25, 2016 7:29 Post subject: |
|
|
Cheers, thought it was an ad.
Pulled them last night resoldered the old connections but didnt make a difference. Will research it further.
Cleaned door switch last night central locking now seems to work only thing when i turn the rear wiper on it locks the doors.
Yup got a haynes manual for it |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|