View previous topic :: View next topic |
Author |
Message |
geodrome *******
Age: 56 Zodiac: Joined: 22 Nov 2008 Posts: 3357 Location: On the beach, surfin? Down under, NSW!
|
Posted: Tue Apr 30, 2013 21:53 Post subject: |
|
|
Can you not afford to get it repaired. Mind if the pump is away the fuel filler pipes probably will be too. |
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Apr 30, 2013 21:53 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
bulldozerfist *
Joined: 27 Feb 2013 Posts: 34 Location: cornwall
|
Posted: Wed May 01, 2013 16:26 Post subject: |
|
|
no i cant fix it,its astronomical the prices for pumps then dialing it in etc,,shame |
|
Back to top |
|
|
geodrome *******
Age: 56 Zodiac: Joined: 22 Nov 2008 Posts: 3357 Location: On the beach, surfin? Down under, NSW!
|
Posted: Wed May 01, 2013 20:45 Post subject: |
|
|
If the pump is rebuilt properly it wont need dialed in.it should be done on the test bench, mine was.
I was speaking to a Mitsubishi parts manager today and he said the parts to repair the pumps are becoming scarce now.
That's a shame. |
|
Back to top |
|
|
Errola Newbie
Age: 66 Zodiac: Joined: 26 Nov 2014 Posts: 1 Location: Jamaica
|
Posted: Wed Nov 26, 2014 11:54 Post subject: |
|
|
I have a 2006 diesel Pajero with the 4M41 engine and is having a problem whereby it does'nt cut out or stall, but it does jerk when in reverse or in drive as soon as it gets warm and stationary. It operates normally once cool until it starts warming up after few minutes. What are the possible problems and solutions. Thanks. |
|
Back to top |
|
|
leoneil Newbie
Age: 42 Zodiac: Joined: 06 Mar 2015 Posts: 5 Location: philippines
|
Posted: Sun Mar 08, 2015 8:09 Post subject: |
|
|
ERROLA, I have the same problem as yours on my 3.2 did. What have you done to fix yours? |
|
Back to top |
|
|
pjmannion *
Age: 43 Zodiac: Joined: 15 Sep 2011 Posts: 12 Location: IRELAND
|
Posted: Mon Jan 04, 2016 11:45 Post subject: |
|
|
geodrome wrote: |
When you say throttle body sensor do you mean the one on the top of the pump?
If you mean the part with the big black plug going to it and the feed pipe coming out at the back, then I am afraid that is the rotor head and requires a major rebuild as it has to be set up on the test bench. |
Hello
The small black square box at the side of the pump with the lead off it has smoke coming out of it whenever the battery is connected and fuse no. 5 (engine management light) blows. Any idea what's causing this? |
|
Back to top |
|
|
3.2 DiD Acv *
Age: 62 Zodiac: Joined: 05 Mar 2016 Posts: 11 Location: Holland
|
Posted: Sat Mar 05, 2016 21:43 Post subject: Speedo sensors |
|
|
Hello all,
This week my 3.2 did 2002 run down when the engine is warm and i slow down to idle speed ,about 800 t/m
Later this week my speedometer fall out. Did these things have something to do with the speed sensors in the fuelpump?
Thank you .
Arno |
|
Back to top |
|
|
MADHIGHLANDER *
Age: 51 Zodiac: Joined: 12 Sep 2016 Posts: 14 Location: MORAYSHIRE
|
Posted: Sun Oct 16, 2016 14:09 Post subject: |
|
|
|
|
Back to top |
|
|
MADHIGHLANDER *
Age: 51 Zodiac: Joined: 12 Sep 2016 Posts: 14 Location: MORAYSHIRE
|
Posted: Sun Oct 16, 2016 14:12 Post subject: |
|
|
i just fitted new fuel pump
4x4 started ok when cold when warmed up didnt have its normal power and was easy stalled and had to turn over 5-10 sec for it to start
dont know if that same problem as u r having
garage changed the same sensors as u have done made no difference so just put new pump on |
|
Back to top |
|
|
Mike terra ***
Age: 71 Zodiac: Joined: 19 Mar 2008 Posts: 140 Location: Nakuru, KENYA.
|
Posted: Tue Nov 22, 2016 11:27 Post subject: |
|
|
Just had an interesting couple of days, my 2006 started missing and cutting out with hard start. NO ENGINE light coming on, eventually I went to the shutoff solenoid on the injector pump and found the tiny spring had totally disintegrated jamming the solenoid. no sooner did we find that problem we had a customer car come in with an identical failure both at about 130000 miles. HAving found my problem my apprentice dislodged the valve lifter arm when replacing the injector pipes. WE started the car to an immediate BANG as valves met piston . NOw looking for some parts . ANyone dismantled a 4m41? |
|
Back to top |
|
|
dodhire Newbie
Age: 65 Zodiac: Joined: 28 Jan 2017 Posts: 2 Location: Scotland
|
Posted: Sat Jan 28, 2017 13:49 Post subject: |
|
|
Just replaced my sensors on pump but it will not start now , it offers but that's it. Help!!! 3.2 did 53 plate |
|
Back to top |
|
|
dodhire Newbie
Age: 65 Zodiac: Joined: 28 Jan 2017 Posts: 2 Location: Scotland
|
Posted: Sat Jan 28, 2017 13:53 Post subject: Won't idle ,now not starting |
|
|
dodhire wrote: |
Just replaced my sensors on pump but it will not start now , it offers but that's it. Help!!! 3.2 did 53 plate |
|
|
Back to top |
|
|
Mike terra ***
Age: 71 Zodiac: Joined: 19 Mar 2008 Posts: 140 Location: Nakuru, KENYA.
|
Posted: Mon Oct 23, 2017 11:49 Post subject: wire colour code and pin positions |
|
|
Refers to a RHD 2006 4M41 shogun.
I have had a short on the speed sensor and temp sensor harness which is part of B36 connector. I cannot see (burnt( the pin positions for SS2 the little I can see looks like Black, Red, and Blue wires, can anyone tell me the position that they go onto the 3 pin sensor connector. I have a good connector without any wires now I need to repair the wires and reconnect.
I have Max Ellerys manual but the colours do not correspond.
Thank you help appreciated. |
|
Back to top |
|
|
Mike terra ***
Age: 71 Zodiac: Joined: 19 Mar 2008 Posts: 140 Location: Nakuru, KENYA.
|
Posted: Mon Oct 23, 2017 13:32 Post subject: wire colour code and pin positions |
|
|
Refers to a RHD 2006 4M41 shogun.
I have had a short on the speed sensor and temp sensor harness which is part of B36 connector. I cannot see (burnt( the pin positions for SS2 the little I can see looks like Black, Red, and Blue wires, can anyone tell me the position that they go onto the 3 pin sensor connector. I have a good connector without any wires now I need to repair the wires and reconnect.
I have Max Ellerys manual but the colours do not correspond.
Thank you help appreciated. |
|
Back to top |
|
|
bmoseti *
Joined: 01 Mar 2021 Posts: 12 Location: Kenya
|
Posted: Wed Aug 11, 2021 16:08 Post subject: |
|
|
This is a really useful guide |
|
Back to top |
|
|
|