View previous topic :: View next topic |
Author |
Message |
TomiDoo *
Age: 37 Zodiac: Joined: 15 Feb 2019 Posts: 18 Location: Serbian
|
Posted: Thu Oct 10, 2019 14:28 Post subject: VP44 Fuel Pump issue |
|
|
I have Pajero 3.2 DID Gen3. 2005year
on driving start to lose power and stop, after that cant start again. and give me white smoke.
anyone know what with the fuel pump can be problem, electronic or mechanic parts.
and anywhere to buy used parts, here in macedonian dont have much cars like this |
|
Back to top |
|
|
Google Sponsor
|
Posted: Thu Oct 10, 2019 14:28 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
TomiDoo *
Age: 37 Zodiac: Joined: 15 Feb 2019 Posts: 18 Location: Serbian
|
Posted: Fri Nov 01, 2019 19:57 Post subject: |
|
|
from Error codes i get 43 and 51
anyone to point where to start looking |
|
Back to top |
|
|
brk ****
Age: 52 Zodiac: Joined: 17 Feb 2009 Posts: 408 Location: ireland
|
Posted: Sat Nov 02, 2019 23:42 Post subject: |
|
|
Don't know this model but. .if I was you I'd go with looking at relays first
B17x...and b15x in the engine bay |
|
Back to top |
|
|
brk ****
Age: 52 Zodiac: Joined: 17 Feb 2009 Posts: 408 Location: ireland
|
Posted: Sat Nov 02, 2019 23:48 Post subject: |
|
|
Don't know this model but. .if I was you I'd go with looking at relays first
B17x...and b15x in the engine bay |
|
Back to top |
|
|
TomiDoo *
Age: 37 Zodiac: Joined: 15 Feb 2019 Posts: 18 Location: Serbian
|
Posted: Sun Nov 03, 2019 9:02 Post subject: |
|
|
brk wrote: |
Don't know this model but. .if I was you I'd go with looking at relays first
B17x...and b15x in the engine bay |
are those relays
with A B on it
i get clicking noise when put the key
and what i see also, when trying to start the dash fuel indicatio goes to empty |
|
Back to top |
|
|
brk ****
Age: 52 Zodiac: Joined: 17 Feb 2009 Posts: 408 Location: ireland
|
|
Back to top |
|
|
TomiDoo *
Age: 37 Zodiac: Joined: 15 Feb 2019 Posts: 18 Location: Serbian
|
Posted: Mon Nov 04, 2019 12:54 Post subject: |
|
|
we check there, all its fine. even replace them with same from difirent car.
the main issue its we cant put on computer :/ now. dont diagnostic |
|
Back to top |
|
|
brk ****
Age: 52 Zodiac: Joined: 17 Feb 2009 Posts: 408 Location: ireland
|
Posted: Mon Nov 04, 2019 15:00 Post subject: |
|
|
Like I said I don't know this model but from looking on here
There is a common problem with a pipe that runs from intake manifold to
To fuel line just before filter houseing and then go's to boost control valve on the side of the filter houseing .apparently it can get blocked at the manifold side
And give coads like on yours .and can leak also. .it's got to be worth a look right.
Now it does say that the fitting on the manifold is made from plastic and easy to break so be careful with it. That plastic fitting is the the bit that blocks up.
Hopefully that helps |
|
Back to top |
|
|
TomiDoo *
Age: 37 Zodiac: Joined: 15 Feb 2019 Posts: 18 Location: Serbian
|
Posted: Fri Jan 17, 2020 13:34 Post subject: |
|
|
the issue its solved
we replace the whole engine with 4m40 2.8 with fuel pump.
the above issue was with fuel pump, and was expencive rebuild or to get used, and the problem may occured again. |
|
Back to top |
|
|
|