View previous topic :: View next topic |
Author |
Message |
EVO_PAJ **
Age: 46 Zodiac: Joined: 30 Aug 2011 Posts: 68 Location: Australia
|
Posted: Tue Feb 03, 2015 11:06 Post subject: |
|
|
Lol T04
Ok 2 things - no 1 , If your selling it, it better be for a Sheet load, you know how hard it is to get these into the country and if your not i got first dibs
and number 2, which center console are you talking about ? The Drink Holder part with the lift up lid and compartment or the spot with the shifter boots and Ciggy lighters ?
If its the later, its the same as an NJ or NK pajero isnt it ?
I mean i have an NK and i think there exactly the same, other than the cup holder ?
Also i didnt know Padoku made and airbox gotta check it out when we catch up next
|
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Feb 03, 2015 11:06 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
T04GTR **
Age: 43 Zodiac: Joined: 29 Jun 2013 Posts: 70 Location: AUSTRALIA,sydney
|
Posted: Wed Feb 04, 2015 9:26 Post subject: |
|
|
yeah the lower bit with the gear boots. and the plastic support for the rear box/lid bit.
that was thru heartland holden/mitsubiushi
will do. besides he pulled out. typical. just need to clean it up abit. as the console i got had done a zillion kms. and has screw holes from a cb or something.
|
|
Back to top |
|
|
alan83 **
Age: 40 Zodiac: Joined: 14 Jan 2013 Posts: 88 Location: aberdeenshire, Scotland
|
Posted: Fri Feb 06, 2015 0:39 Post subject: |
|
|
That console not the same on the generic pajero of that age? Could get one 2nd hand?
|
|
Back to top |
|
|
OFF RD **
Joined: 11 Jul 2014 Posts: 59 Location: Auckland NZ
|
Posted: Sun Feb 08, 2015 9:38 Post subject: |
|
|
Pity you guys are soo far away. I just picked up a heap of interior EVO parts from an old guy, he ran up to me while I was getting in my truck. Told me he used to race them, split up with his wife and told me to take anything I wanted for a box of beer.
Got me a mint rear door, no rust, centre console(used the hinge) still have a whole unit, front brake rotors, new brake pads frnt n rear, spare rear side windows, front ball joints, mint front headlights, indicators. Heaps of stuff. Door rubbers, even the 12v dc cap for the cigy lighter. Lol
Would be happy to send you the console I have spare.
|
|
Back to top |
|
|
T04GTR **
Age: 43 Zodiac: Joined: 29 Jun 2013 Posts: 70 Location: AUSTRALIA,sydney
|
Posted: Mon Feb 09, 2015 10:56 Post subject: |
|
|
if its a manual one i would be intersted!
|
|
Back to top |
|
|
OFF RD **
Joined: 11 Jul 2014 Posts: 59 Location: Auckland NZ
|
Posted: Sat Mar 07, 2015 22:11 Post subject: |
|
|
Nah Auto one mate. No good for mine either but managed to get couple things off it.
|
|
Back to top |
|
|
T04GTR **
Age: 43 Zodiac: Joined: 29 Jun 2013 Posts: 70 Location: AUSTRALIA,sydney
|
Posted: Mon Apr 27, 2015 11:36 Post subject: |
|
|
all good. ebay to the rescue. same as local manual ones if it has srs airbags
|
|
Back to top |
|
|
dervmonster LifeTime Member
Age: 55 Zodiac: Joined: 09 Aug 2005 Posts: 296 Location: Llanelli
|
Posted: Sun Jan 31, 2016 23:20 Post subject: |
|
|
I use evoscan and tactrix as I can dyno or virtual rolling road on the move then adjust as needed. My advise to any one reading this is make sure you get a wide band o2 installed if your tuning these beasts.
|
|
Back to top |
|
|
T04GTR **
Age: 43 Zodiac: Joined: 29 Jun 2013 Posts: 70 Location: AUSTRALIA,sydney
|
Posted: Wed Jan 18, 2017 12:00 Post subject: |
|
|
done some more stuff.
put in ford miami 5.0 supercharged injectors,(similar flow but less dead-time) e85 with 50 psi fuel pressure the safc is all at zero. wot from 3000rpm 12.8 afr going up to 13 at 7800. still had to pull timing out with the s-itc. it made 256hp at the wheels on a mainline hub dyno.
as for an "octane booster" 10L of methanol with 98 worked the best. anything more than 10L it would separate a little so on first start it runs pretty rough till the fuel pump mixes it up again.
|
|
Back to top |
|
|
OFF RD **
Joined: 11 Jul 2014 Posts: 59 Location: Auckland NZ
|
Posted: Sat Jan 21, 2017 9:26 Post subject: |
|
|
Mean bro. What size injectors?
|
|
Back to top |
|
|
Gerard LifeTime Member
Age: 72 Zodiac: Joined: 12 Feb 2005 Posts: 64 Location: Evoland,Aberdeenshire
|
Posted: Mon Feb 10, 2020 15:16 Post subject: AFC neo |
|
|
Hi
Reading this thread you guys might be able to help me
I have now fully rebuilt my Evo and want to sort fueling
I have an apexi aft neo and want to connect it up but struggling to find wiring diagram to shoe it into the eco.
Can you help
Description: |
|
Filesize: |
40.96 KB |
Viewed: |
7017 Time(s) |
|
|
|
Back to top |
|
|
|