The Mitsubishi Pajero Owners Club®

[jonnyshaw49]

Hi i have a 2003 3.2 DID SWB auto shogun. The car will drive fine  and change gear if the accelerator is pressed gently. If the accelerator is preased harder for example when going up hill or on a slip road the gears wont change up. I have to either let of the accelerartor and re apply gently or manually change the gears. It seems to get worse higher up the gears 3-4th and 4th-5th.

I started by changing the ATF fluid and filter. This was a kit from Mitzy Bitz so im assuming it would be suitable atf fluid. I recently read it has to be diaqueen but it wasnt. Anyway it is just the same with this fluid in.

The car doesnt bring up any faults except once when it came up speed sensor fault.This code was cleared and hasnt since come back on.

I have since changed the two fuel pump speed sensors and it didnt make any difference.

I then read somewhere that there are two speed sensors on the automatic gearbox. I ordered two transmission speed sensors part number g4t08072 but can only find.one on the box.

Would anyone know if there are two of these on the gearbox or do i need another part number?

Also are the speed sensors the output and input shaft sensors?

I love this car but its driving me insane trying to find what is causing this problem. I would much apprecoate any other ideas to try.

Thanks in advance for any advice

[Google]