|
The Mitsubishi Pajero Owners Club® The Mitsubishi Pajero, Shogun, Montero, Challenger, Raider and EVO 4x4 Owner's Club
|
View previous topic :: View next topic |
Author |
Message |
Busapaul Newbie
Age: 52 Zodiac: Joined: 06 Dec 2020 Posts: 5 Location: Kent
|
Posted: Thu Feb 25, 2021 23:19 Post subject: Resistor mod on egr 2016- model |
|
|
Hi ,
I have a 2016 sg4 ,
Will/does the resistor mod work with this ecu ,
I have read that there is a difference and the 4k7 resistor may not be good
I have read there is a 12k resistor that goes in the blue/black cable and another 12k resistor goes in parallel with the temp sensor
Can anyone help ,
Paul |
|
Back to top |
|
|
Google Sponsor
|
Posted: Thu Feb 25, 2021 23:19 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
Purple Orchid *
Age: 61 Zodiac: Joined: 04 Aug 2009 Posts: 30 Location: Nottingham
|
Posted: Tue Mar 02, 2021 19:43 Post subject: Egr resistor |
|
|
There is a good thread on this on the Aussi pajero forum
I’ve got 10k & 12k resistors on order! Previously fitted the 4.7k one, should have checked it’s operation with an obd reader, will try to do this when I get the new resistors, put mine on bullet connectors so they can be changed/removed easily
My trucks a 2017 67 plate swb barbarian, also have a catch can fitted to stop the crud going into the inlet manifold.
Egr resistor mod |
|
Back to top |
|
|
Busapaul Newbie
Age: 52 Zodiac: Joined: 06 Dec 2020 Posts: 5 Location: Kent
|
Posted: Wed Mar 03, 2021 5:55 Post subject: |
|
|
Sounds similar to something I read , but cannot find a schematic any where , I have changed the 4.7k for a 6.8k , so far in current temps egr has not tried to open , but I feel the 2 resistor parallel ‘ series will be more stable with temp change ,
Car is remapped , egr is blanked , catch can is issue ( the one i been sent has 10mm hoses ) , i will not fit is due to it being restrictive waiting for correct one to arrive
Do you have link for that Aussie forum |
|
Back to top |
|
|
Purple Orchid *
Age: 61 Zodiac: Joined: 04 Aug 2009 Posts: 30 Location: Nottingham
|
Posted: Fri Mar 12, 2021 15:05 Post subject: |
|
|
Finally got the OBD connected & checked the 4.7k resistor, EGR commanded was operating up to 30% with some full open spikes.
Changed it to a 12k one ( mine are on male/female bullet connectors so can be removed easily)
EGR now remained on 0%, doesn’t seem to be any codes come up, will see how things go! |
|
Back to top |
|
|
Bananah Newbie
Age: 48 Zodiac: Joined: 18 Nov 2021 Posts: 4 Location: UK
|
Posted: Thu Dec 09, 2021 14:26 Post subject: EGR disable Resistor for 2015 > |
|
|
Hi,
Has anyone concluded which resistor best to use for disabling the EGR on post-2015 (UK) Shoguns?
There seemed to be a 10k ohm and/or 12k ohm resistor which appeared to work but there was also talk of needing to use two in separate wires?
Thanks! |
|
Back to top |
|
|
Purple Orchid *
Age: 61 Zodiac: Joined: 04 Aug 2009 Posts: 30 Location: Nottingham
|
Posted: Thu Dec 09, 2021 14:42 Post subject: |
|
|
12k resistor in the blue/black wires works, egr operation monitored via obd scanner, sits at 0% all the time. |
|
Back to top |
|
|
Bananah Newbie
Age: 48 Zodiac: Joined: 18 Nov 2021 Posts: 4 Location: UK
|
Posted: Fri Dec 10, 2021 10:38 Post subject: |
|
|
Hi Purple Orchid,
Thank you for the clarification! |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|