The Mitsubishi Pajero Owners Club®

AJR-Shogun · Posted: Fri Dec 10, 2021 19:50 Post subject: MP-8000 13 pin connector pin

Hi all this is my first post here, I’m looking for the pin out of the 13 pin display cable that comes from the rear of the MP-8000 satnav unit. Does anyone have it / can point me in the right direction.

Google · Sponsor

AJR-Shogun · Posted: Sat Dec 11, 2021 16:08 Post subject:

When looking at the socket starting top left these were my reading with a multimeter today

1 - -0.01 green
2- 4.58Vdc NC
3-4.58vdc NC
4- 5vdc
5-0.04
6-002
7-4.95
8-4.36
9-1.34
10-0.005
11-0
12-0
13-0

Housing - shield

Purple cable = blue signal
Green cable = red signal
Blue cable = green signal
Pink = vertical sync
Grey = activate screen ?

This appeared to me like analog video plus sync, so I plugged connected the wires to a vga cable and that to and old PC and got an image on the screen. Not perfect I must admit it was leaning to one side and doubled probably a resolution issue.

I would post an image but I’m not allowed to yet.