View previous topic :: View next topic |
Author |
Message |
Dpcunningham ****
Age: 54 Zodiac: Joined: 16 Sep 2016 Posts: 496 Location: West Yorkshire
|
Posted: Sat Jun 02, 2018 11:14 Post subject: Power steering o ring |
|
|
I've got a power steering fluid leak just under the banjo bolt on my 2.8 paj just wondering before I start the job CAN NEW O RINGS be fitted without removal of the pump from the engine
Any help or advice is greatly appreciated |
|
Back to top |
|
|
Google Sponsor
|
Posted: Sat Jun 02, 2018 11:14 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
kenthepipe LifeTime Member
Joined: 11 Mar 2005 Posts: 4366 Location: North-East
|
|
Back to top |
|
|
Dpcunningham ****
Age: 54 Zodiac: Joined: 16 Sep 2016 Posts: 496 Location: West Yorkshire
|
Posted: Sat Jun 02, 2018 11:24 Post subject: Power steering o ring |
|
|
Yes Ken it's them 2 little ones that are leaking but unsure if I need to remove the pump to change them |
|
Back to top |
|
|
kenthepipe LifeTime Member
Joined: 11 Mar 2005 Posts: 4366 Location: North-East
|
Posted: Sat Jun 02, 2018 12:53 Post subject: Re: Power steering o ring |
|
|
Dpcunningham wrote: |
Yes Ken it's them 2 little ones that are leaking but unsure if I need to remove the pump to change them |
Sorry Dp, not sure on that It probably is all down to the access in situ, and if you can get a puller in there if it's required?, unless someone has done it on here.., logically though, it would be easier removed ?
..., |
|
Back to top |
|
|
Dpcunningham ****
Age: 54 Zodiac: Joined: 16 Sep 2016 Posts: 496 Location: West Yorkshire
|
Posted: Sat Jun 02, 2018 14:15 Post subject: Re: Power steering o ring |
|
|
kenthepipe wrote: |
Dpcunningham wrote: |
Yes Ken it's them 2 little ones that are leaking but unsure if I need to remove the pump to change them |
Sorry Dp, not sure on that It probably is all down to the access in situ, and if you can get a puller in there if it's required?, unless someone has done it on here.., logically though, it would be easier removed ?
..., |
I suppose it would be easier if removed but would I need to set the timing ect |
|
Back to top |
|
|
kenthepipe LifeTime Member
Joined: 11 Mar 2005 Posts: 4366 Location: North-East
|
Posted: Sat Jun 02, 2018 16:39 Post subject: Re: Power steering o ring |
|
|
Dpcunningham wrote: |
kenthepipe wrote: |
Dpcunningham wrote: |
Yes Ken it's them 2 little ones that are leaking but unsure if I need to remove the pump to change them |
Sorry Dp, not sure on that It probably is all down to the access in situ, and if you can get a puller in there if it's required?, unless someone has done it on here.., logically though, it would be easier removed ?
..., |
I suppose it would be easier if removed but would I need to set the timing ect |
The honest answer to that Dp, is I ain't got a clue ?.... |
|
Back to top |
|
|
emax LifeTime Member
Age: 67 Zodiac: Joined: 02 Aug 2007 Posts: 2277 Location: Purleigh
|
Posted: Sat Jun 02, 2018 17:28 Post subject: |
|
|
From Memory, If you undo the bolt it just lifts out with the o rings on it. There are no timing issues if you have to take it off. |
|
Back to top |
|
|
Dpcunningham ****
Age: 54 Zodiac: Joined: 16 Sep 2016 Posts: 496 Location: West Yorkshire
|
Posted: Sat Jun 02, 2018 17:54 Post subject: Power steering o ring |
|
|
emax wrote: |
From Memory, If you undo the bolt it just lifts out with the o rings on it. There are no timing issues if you have to take it off. |
Cheers for the input emax I will give it ago tomorrow if it stops raining 😁😁 |
|
Back to top |
|
|
davembp ******
Age: 59 Zodiac: Joined: 19 Nov 2006 Posts: 2187 Location: chesterfield
|
Posted: Sun Jun 03, 2018 16:43 Post subject: |
|
|
Just undo the nut on top, the big bit lifts off and just replace the two 'O' rings. bit fiddly then put back together. I did mine a few months ago. |
|
Back to top |
|
|
zippo12in Newbie
Age: 54 Zodiac: Joined: 22 Jan 2021 Posts: 4 Location: philippines
|
Posted: Sun Aug 28, 2022 11:02 Post subject: O rings |
|
|
Any one have any idea of the oring sizes on this? Is m in the Philippines and can't locate factory orginal.
Just the top two. I do know the inlet is 9mm*1.5mm(Cs) |
|
Back to top |
|
|
Dpcunningham ****
Age: 54 Zodiac: Joined: 16 Sep 2016 Posts: 496 Location: West Yorkshire
|
Posted: Sun Aug 28, 2022 14:29 Post subject: Power steering o ring |
|
|
go on Internet and find amayama they have everything for pajero/shogun somewhere in Japan |
|
Back to top |
|
|
kenthepipe LifeTime Member
Joined: 11 Mar 2005 Posts: 4366 Location: North-East
|
Posted: Sun Aug 28, 2022 19:42 Post subject: Re: Power steering o ring |
|
|
Dpcunningham wrote: |
go on Internet and find amayama they have everything for pajero/shogun somewhere in Japan |
Great tip dp, cheers for posting 😉 |
|
Back to top |
|
|
Dpcunningham ****
Age: 54 Zodiac: Joined: 16 Sep 2016 Posts: 496 Location: West Yorkshire
|
Posted: Sun Aug 28, 2022 20:21 Post subject: Power steering o ring |
|
|
Not a problem Ken hope your well 👍 |
|
Back to top |
|
|
kenthepipe LifeTime Member
Joined: 11 Mar 2005 Posts: 4366 Location: North-East
|
Posted: Sun Aug 28, 2022 22:12 Post subject: Re: Power steering o ring |
|
|
Dpcunningham wrote: |
Not a problem Ken hope your well 👍 |
Aye not too bad dp, hope you and yours are well too 😉 |
|
Back to top |
|
|
zippo12in Newbie
Age: 54 Zodiac: Joined: 22 Jan 2021 Posts: 4 Location: philippines
|
Posted: Mon Aug 29, 2022 17:41 Post subject: Re: Power steering o ring |
|
|
Dpcunningham wrote: |
go on Internet and find amayama they have everything for pajero/shogun somewhere in Japan |
Seen the site. Would horrid trying to get that into the Philippines. Would likely take months couple weeks in the mail. Then would sit with customs here . International shipping is a no go I. This 3rd world hole
Was looking for dimensions of the o-rings. |
|
Back to top |
|
|
|