View previous topic :: View next topic |
Author |
Message |
Tui *

Age: 61 Zodiac:  Joined: 19 Dec 2017 Posts: 15 Location: Highlands and Islands, UK
|
Posted: Sat Jun 13, 2020 17:58 Post subject: Air con regas port. R134A |
|
|
Hi All. Looking to tap your expertise please. I have a 2017 LWB Shogun SG3 and apart from modifying the rear lights, havnt really touched it as it was bought new and all systems seem to be ok. I left it sitting for 4 months whilst I was away on a long holiday and the air con is not working, The air con is not blowing cold (compressor clutch not kicking in) and all indications seem to be that the gas level is low. From what I can gather this situation will prevent the compressor clutch from engaging. All tables and sites I have looked at suggest the air con gas is R134A and certainly the L port (located just below the fuel filter) looks like a R134A post as pictured on some previous posts.
I know sub zero will give me a row here for trying to do it myself but I bought an STP recharge hose and R134a gas from halfords but cant get the nozzle from the recharge hose to lock properly on to the L port. Unfortunately I have unwrapped the seal on the gas cannister so cant take it back.
Any ideas anyone what Im doing wrong or where can I get a quality recharge hose?
Thanks. Tui |
|
Back to top |
|
 |
Google Sponsor

|
Posted: Sat Jun 13, 2020 17:58 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
 |
Tui *

Age: 61 Zodiac:  Joined: 19 Dec 2017 Posts: 15 Location: Highlands and Islands, UK
|
Posted: Wed Jun 17, 2020 19:09 Post subject: Oops. My mistake |
|
|
Hello community. Time to fess up re my previous post. Looks like I made a major error.
Despite several Air con websites i consulted to find out what air con refrigerant my 2017 shogun used, all of which told me R134a, I was wrong.
No wonder I had a hard time trying to connect the R134a adaptor.
Apparently all cars made after 2017 use the newer more expensive (and more environmentally friendly) R1234YF, but as my Shogun LWB was registered in 2017 (but probably made in 2015) I believed it to be the old style, as confirmed by several manufacturers.
My 2017 LWB Shogun SG3 actualy uses R1234YF. It says so on a fairly obvious sticker on the bonnet landing panel.
Sorry if I have put anyone to any trouble.
Tui  |
|
Back to top |
|
 |
peteinchad LifeTime Member

Joined: 07 Jan 2013 Posts: 15079 Location: UK
|
Posted: Wed Jun 17, 2020 19:16 Post subject: |
|
|
I am afraid that I just don't understand why people buy those DIY things from Halfords.
All you can do is top up the gas - what about leak testing and the adding of lubricant?
I don't actually think I have ever known anyone who has managed to do a successful job with them.
I always use a specialist and I don't think they are that much more expensive than trying to get a good job from a DIY cannister. |
|
Back to top |
|
 |
Tui *

Age: 61 Zodiac:  Joined: 19 Dec 2017 Posts: 15 Location: Highlands and Islands, UK
|
Posted: Wed Jun 17, 2020 22:17 Post subject: |
|
|
Thank you for that advice which I am now going to follow. Lesson learned in this case. Tui |
|
Back to top |
|
 |
Where_what *

Age: 56 Zodiac:  Joined: 19 May 2020 Posts: 21 Location: Essex
|
Posted: Wed Nov 11, 2020 15:53 Post subject: |
|
|
peteinchad wrote: |
I am afraid that I just don't understand why people buy those DIY things from Halfords.
All you can do is top up the gas - what about leak testing and the adding of lubricant?
I don't actually think I have ever known anyone who has managed to do a successful job with them.
I always use a specialist and I don't think they are that much more expensive than trying to get a good job from a DIY cannister. |
I have. I used the Superseal Air Conditioning Leak Sealant MRL-3 and with a bottle of gas. Partially fill the system with gas, then follow the instructions on the Superseal. After completing the process top up the remainder of the system. So far mine has held pressure for 6 months. PS 53 Shogun Warrior. |
|
Back to top |
|
 |
Tui *

Age: 61 Zodiac:  Joined: 19 Dec 2017 Posts: 15 Location: Highlands and Islands, UK
|
Posted: Wed Nov 11, 2020 16:31 Post subject: Air con |
|
|
Thank you where what.
Turns out I had a major leak in the pipes that run towards the rear of the car. Put it in to mitsubishi to have it sorted under warranty and they fixed the problem and 're gassed the system.
Lesson learned. |
|
Back to top |
|
 |
assassin ********

Age: 63 Zodiac:  Joined: 29 Jul 2009 Posts: 5033 Location: Wherever I Wander To -- Midlands
|
Posted: Wed Nov 18, 2020 4:07 Post subject: |
|
|
peteinchad wrote: |
I am afraid that I just don't understand why people buy those DIY things from Halfords.
All you can do is top up the gas - what about leak testing and the adding of lubricant?
I don't actually think I have ever known anyone who has managed to do a successful job with them.
I always use a specialist and I don't think they are that much more expensive than trying to get a good job from a DIY cannister. |
And they have liability insurance should anything go wrong and you can make a civil claim against them. |
|
Back to top |
|
 |
Where_what *

Age: 56 Zodiac:  Joined: 19 May 2020 Posts: 21 Location: Essex
|
Posted: Tue Feb 07, 2023 21:53 Post subject: |
|
|
Where_what wrote: |
peteinchad wrote: |
I am afraid that I just don't understand why people buy those DIY things from Halfords.
All you can do is top up the gas - what about leak testing and the adding of lubricant?
I don't actually think I have ever known anyone who has managed to do a successful job with them.
I always use a specialist and I don't think they are that much more expensive than trying to get a good job from a DIY cannister. |
I have. I used the Superseal Air Conditioning Leak Sealant MRL-3 and with a bottle of gas. Partially fill the system with gas, then follow the instructions on the Superseal. After completing the process top up the remainder of the system. So far mine has held pressure for 6 months. PS 53 Shogun Warrior. |
Still working. |
|
Back to top |
|
 |
Where_what *

Age: 56 Zodiac:  Joined: 19 May 2020 Posts: 21 Location: Essex
|
Posted: Mon Mar 13, 2023 8:55 Post subject: |
|
|
Where_what wrote: |
peteinchad wrote: |
I am afraid that I just don't understand why people buy those DIY things from Halfords.
All you can do is top up the gas - what about leak testing and the adding of lubricant?
I don't actually think I have ever known anyone who has managed to do a successful job with them.
I always use a specialist and I don't think they are that much more expensive than trying to get a good job from a DIY cannister. |
I have. I used the Superseal Air Conditioning Leak Sealant MRL-3 and with a bottle of gas. Partially fill the system with gas, then follow the instructions on the Superseal. After completing the process top up the remainder of the system. So far mine has held pressure for 6 months. PS 53 Shogun Warrior. |
Update: Still working - March '23. Shame about the gearbox;another thread. |
|
Back to top |
|
 |
|