|
The Mitsubishi Pajero Owners ClubŪ The Mitsubishi Pajero, Shogun, Montero, Challenger, Raider and EVO 4x4 Owner's Club
|
View previous topic :: View next topic |
Author |
Message |
cyp ****
Age: 48 Zodiac: Joined: 02 Jul 2005 Posts: 416 Location: Northern Cyprus
|
Posted: Sun Aug 21, 2005 12:34 Post subject: Engine & Gearbox Learning Function (important info) |
|
|
Mitsubishi Service buletin MSB-00E00-505
Learning function if GDI engine.
On GDI equipped cars, when the ECu is replaced or the battery is reset (disconnected), an idle learning function for the ECU will be required
Idle Learning Procedure
1. Start the engine and warm the engine until the coolant temperature reaches 85c or higher.
When the coolant temperature is 85c or higher, you only have to switch the ignition to the ON position.
2. Turn the Ignition to the LOCK position to stop the engine.
3. After 10 or more seconds, restart the engine.
4. Run the engine at idle for 10 minutes with Transmission in nuetral (P for Auto), air con and heater off.
5. Stop the engine.
6. Restart the engine and run it at idle for 10 minutes with Transmission in neutral (P for Auto), air con on at max cool, fan high speed and windows open.
7. Repeat steps 5 and 6.
Note:
1. When ambient temp is 20c or higher and the air con has been continually operated, step 7 may be omitted.
2. During idle in steps 4 & 6, when engine operation switches from lean operation to stoichiometric operation, engine stall can occur. In this case, clean the throttle body (throttle valve) thoroughly and repeat step 1 and the subsequent steps.
I also have another document which has topic "General Information, Computer Relearn Information (All Models)
but the size of scanned picture is not sutiable to resize it and post it here, if any of you need that please PM, I can email it.
Hope this is of use to somebody
Cheers |
|
Back to top |
|
|
Google Sponsor
|
Posted: Sun Aug 21, 2005 12:34 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
cyp ****
Age: 48 Zodiac: Joined: 02 Jul 2005 Posts: 416 Location: Northern Cyprus
|
Posted: Fri Sep 23, 2005 19:53 Post subject: |
|
|
this post has to be transfered to the TECHNICAL FAQ section
members can find these info easier
cyp |
|
Back to top |
|
|
cyp ****
Age: 48 Zodiac: Joined: 02 Jul 2005 Posts: 416 Location: Northern Cyprus
|
Posted: Sun Sep 25, 2005 8:04 Post subject: |
|
|
cyp wrote: |
this post has to be transfered to the TECHNICAL FAQ section
members can find these info easier
cyp |
hey POCUK please read this and move this post to the place that members can easily find it such as TECHNICAL FAQ section |
|
Back to top |
|
|
Brandy *
Joined: 06 Feb 2005 Posts: 37 Location: Worcs
|
Posted: Sun Sep 25, 2005 17:16 Post subject: |
|
|
Excellent information - thanks for the posting |
|
Back to top |
|
|
nugundam93 ***
Age: 42 Zodiac: Joined: 30 May 2005 Posts: 217 Location: Anaheim Electronics over at Von Braun City, Luna
|
Posted: Sun Sep 25, 2005 23:29 Post subject: |
|
|
hmmm...kinda like an ECU reset eh? nice find cyp! |
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|