The Mitsubishi Pajero Owners Club®

danny94 · Posted: Sun Apr 01, 2012 16:12 Post subject: 2002 Shogun Key Fob Reprogramming

Recently the battery in my key fob ran low and i replaced it. i kept the other fob to se whilst i bought new batteries. i have replaced the batteries however both fob keys have no effect on locking/unlocking the car. The car is a mitsubishi shogun 2002 equippe. the remote is two circular buttons, with one of them a little bigger (this is the button to unlock and lock the car) the re light in between them works when you press the button but has no effect on the car. could someone please advise me on how to reprogram the fobs

thanks in advance Smile

Google · Sponsor

Missing Lincs · Posted: Thu Apr 05, 2012 16:45 Post subject:

Do you know what type of alarm you have? Is it factory fit or aftermarket?

Doug Hope · Posted: Fri Apr 06, 2012 8:17 Post subject:

Hold both buttons until the led stops flashing then press the big one

danny94 · Posted: Fri Apr 06, 2012 13:37 Post subject:

it is a cobra model 7777 factory fit alarm

danny94 · Posted: Tue Apr 10, 2012 14:30 Post subject:

ive managed to find how to reprogram the fob with the system.
stand outside the car and hold both buttons for 10 seconds and then press left button, right button, left button. the indicators will flash and the key can be programme by pressing the lock button.

Desy176 · Posted: Wed Nov 22, 2017 7:31 Post subject:

Hi, I happened to see the topic. This is what I was looking for
BB&T live person

Colin the dipstick · Posted: Fri Dec 08, 2017 13:34 Post subject: Alarm fobs

I came on and was going to ask about the fobs not working after battery replacements, saw this article and tried it .... Works a treat Very Happy

alexishere89 · Posted: Wed Jan 24, 2018 4:26 Post subject:

Hey guys on my second shogun this one has 2 key fob like mentioned but only one need reprogramming is it the same process ? As I only have one fob and dare reprogramme 2nd fob incase it loses both codes .
Thanks guys

TxLDN · Newbie Joined: 19 Feb 2018 Posts: 9 Location: Bedfordshire

I have one working fob, how can I add another?

peteinchad · Posted: Sat Feb 24, 2018 5:53 Post subject:

TxLDN · Newbie Joined: 19 Feb 2018 Posts: 9 Location: Bedfordshire

Don't you need the pin to add a new fob?

peteinchad · Posted: Mon Feb 26, 2018 5:50 Post subject:

Not according to the posts above.

My previous truck had the same fobs and I didn't need a PIN.

Wheymonster · Posted: Tue Apr 26, 2022 21:49 Post subject:

Well, I can't cure this and it's doing me HEAD IN. Replaced fob batt and now the hazards go off and no central locking. The 10s key fob combo and barrel key turn isn't working. HELP

Simonfathead · Posted: Fri Apr 29, 2022 9:35 Post subject:

you might need to reprogram the fob do you have the pin and bullet pen thing (torpedo), if you do reprogram you need to do all your fobs and touch pen things

Raki · Newbie Joined: 19 Jan 2006 Posts: 4 Location: Isle of Man

Hi All

I have a Mk3 Shogun, which, of course, came without any fobs or touch keys.

It has a Cobra 8185 in the usual place, and I have the serial for it, and there is a 4 digit code in the paperwork which I'm assuming is the programming PIN for this.

I've no reason to think it might not work, so I'd like to program some fobs and that for it. Here are the options as I see them:
-Get hold of some fobs/touchkeys from wherever, and use the switchey-ignition procedure to program them to my system
-Swap the alarm unit out for a different one of the same model, which has at least a touchkey programmed to it.

Has anyone had any success doing either of these?

Cheers.