The Mitsubishi Pajero Owners Club®

sali · * Joined: 18 Nov 2002 Posts: 48 Location: West Midlands

Dear Friends

Does anybody with a Pajero 2.8TD LWB live in or very near to Dudley who could bring their Pajero to a friend of mines garage so that we can compare my Pajeros wires with yours. I had my fuel pump reconditioned, however, when we we've fit it back we've messed up some wires etc. Now teh starting problem that I had is fine but I've lost my overdrive and there are few spare wires

May be I could treat you to a balti afterwards!!!

Ali

Google · Sponsor

Stuey · Posted: Thu Jan 23, 2003 23:40 Post subject:

Almost worth driving up from Devon specially...... anyone else closer though?

Fishy · ** Joined: 01 Nov 2002 Posts: 55 Location: Birmingham

try Stuart Spencer Autos in Tipton ... 0121 557 7795 ... talk to Stuart or Phil !

terry · Posted: Fri Jan 24, 2003 16:34 Post subject:

Try spending £15 on a Pajero manual from the POC......tight *beep*......lol

Fishy · ** Joined: 01 Nov 2002 Posts: 55 Location: Birmingham

got one ... but thanks for your help !

allan · Posted: Fri Jan 24, 2003 17:53 Post subject:

What, and use the manual to prop up the torch to shine on the pump wiring?

Haynes manuals dont have that sort of information in them!!!

allan

terry · Posted: Fri Jan 24, 2003 21:42 Post subject:

They have wiring diagrams in them Allan.....I use them for that purpose

sali · * Joined: 18 Nov 2002 Posts: 48 Location: West Midlands

I would agree with Allan there are no wire diagrams etc in the manual. Not to that detail. Anyway I already have the manual and the owners manual for your information!, However, they are not useful if you want to look for detail. Also have a copy of the CD but that hasn't got all the modules on it

terry · Posted: Sat Jan 25, 2003 11:28 Post subject:

I usually use the Haynes for wiring diagrams but I find it odd they do not to go to that much detail, are there any markings on the pump as to what kind of terminal they are? i.e letters or symbols?

Just thought of a good idea, are there any Mitsi dealers (not main but car sales kind) near you? You could ask the if they would be so kind as to let you have a butchers at the pump in situ. Or are there any 4x4 scrappers nearby, they would let you see one wired up....just a thought