The Mitsubishi Pajero Owners Club®

hazee · Posted: Sun Sep 28, 2014 16:27 Post subject: Started fitting a tow bar today

Removing the rear bumper was more difficult that it thought it would be .

A fair amount of snapped bolts the be removed

I need some clips for the bumper plate anybody know the part number ?

Also need new bolts

These bumper plates are they evo only or on other models

Google · Sponsor

peteinchad · Posted: Sun Sep 28, 2014 17:03 Post subject: Re: Started fitting a tow bar today

NOS EXUP · * Joined: 03 Nov 2011 Posts: 36 Location: Little Bentley

The bumper plate is Evolution only

The clips are quite expensive each and there are lots of them

Better to buy a new bumper plate as it comes with a full set of clips

The bolts are just m8 bolts with washers - just get stainless ones with washers

hazee · Posted: Mon Sep 29, 2014 0:12 Post subject:

I have a feeling if I go and try and order a new bumper plate I may be laughed at..
They probably won't have a clue..

Any idea of part number or general cost

hazee · Posted: Mon Sep 29, 2014 0:24 Post subject:

http://www.amayama.com/search/?q=MB182799

Found the clip part number

http://www.fixag.ru/400x400/4122.jpg

Found a good epc

http://japancars.ru/index.php?route=catalog/mitsubishi&grp_id=42&area=M00&cat=A0235609A&mdl=V55W&clf=GYXH&cfg_id=1&blk_id=030

hazee · Posted: Mon Sep 29, 2014 0:30 Post subject:

NOS EXUP · * Joined: 03 Nov 2011 Posts: 36 Location: Little Bentley

I bought a complete bumper plate with clips last year

Phone Holdcroft Mazda and Mitsubishi in Stoke and ask for Andrew in Mitsubishi parts

He knows the V55 well and will sort it

Part may have to come from Japan but he should be able to sort it
Tell him Nick Claydon recommended