The Mitsubishi Pajero Owners Club®

Kevstar81 · Posted: Mon Apr 23, 2018 14:07 Post subject: Alarm wiring diagram. aftermarket

Hi, I have brought a Hawk alarm and im looking for somekind of wiring diagram i can use and locations of wires.
I have got total closure with the alarm. i know it can do 4 windows but dont know if it can do sunroof as well. but i would be happy with just 4 windows to close at the same time.

Google · Sponsor

Simon_W · ******* Joined: 21 May 2013 Posts: 4881 Location: Watford

Didn't you get an installation manual? They are normally all that's needed.

Download from here if you didn't. https://www.hawkcaralarm.com/manuals

Have a good read through, and post again if you can't find the wires you need to identify. It would also help if you gave the model and year of your Mitsi.

Kevstar81 · Posted: Mon Apr 23, 2018 17:47 Post subject:

Sorry its a 2.8L shogun 1998
yes i have the manual for the hawk alarm and yes it tells me to connect red wire to power and yellow wire to central locking but i want to know what wire and where to connect the yellow wire to.

Simon_W · ******* Joined: 21 May 2013 Posts: 4881 Location: Watford

Which model of Hawk alarm is it?

Kevstar81 · Posted: Mon Apr 23, 2018 17:53 Post subject:

HA-240 with total closure

Simon_W · ******* Joined: 21 May 2013 Posts: 4881 Location: Watford

I can only find the 240 Lite. Has the 'total closure' version got the same wiring diagram as below? If so, which of the yellows are you referring to? Connector #12?

Kevstar81 · Posted: Mon Apr 23, 2018 18:13 Post subject:

as i keep saying i dont need to know what colour wires from the alarm as i have the manual for the alarm.
I need to know the location to connect my alarm up to and also the colour wire that are orignial in the car.
i know indicator are green/red and green/yellow and that is located behind switch on dash.
I have been told that there is a central locking relay near the drivers footwell but dont know what wires control the central locking, by looking at door it looks like i have to chop black wire and connect alarm to each side of the black wire.
Black power = lock
black no power = open or something like this

Simon_W · ******* Joined: 21 May 2013 Posts: 4881 Location: Watford

The Pajero/Shogun locking system is negative pulse, as per diagram A of the 240 Lite manual.

Simon_W · ******* Joined: 21 May 2013 Posts: 4881 Location: Watford

Kevstar81 · Posted: Mon Apr 23, 2018 18:27 Post subject:

ah ok this makes a bit more sense now. ill go looking for them. just have to sort out total closure next lol

Kevstar81 · Posted: Sun May 20, 2018 8:59 Post subject:

Fitted the alarm. Apart from total window closure.
When I open any other door than the drivers door, the alarm will reactivate.
What have I done wrong ?

Simon_W · ******* Joined: 21 May 2013 Posts: 4881 Location: Watford

Do you mean the alarm is triggered by the doors being opened or it's being set again?

Kevstar81 · Posted: Sun May 20, 2018 9:36 Post subject:

If I open any other door other than the drivers then the alarm will lock the doors again. So the only door the alarm will sound would be drivers door

Simon_W · ******* Joined: 21 May 2013 Posts: 4881 Location: Watford

All I can suggest is that you double check the wiring that you've done, and if you can't find a fault then I'd contact the suppliers for advice.