The Mitsubishi Pajero Owners Club®

[AliHos1]

Hello everyone,
I'm new to the forum so hello everyone.
im rather new to the shogun as well, im a land rover guy really.
Anyway,
I bought around 2 months ago a one owner 200 mk2 24v 3.0 petrol lwb shogun, great complete car very little rust etc and running with MOT.

used it for around the 2 months faultlessly.
one evening drove home, parked up, with (not issues) i did drive bit more enthusiastically than normal but well within the cars realms etc.

come to turn on next day and cranking but no start, first port of call was the AA, helpful guy but quickly concluded its immobiliser and said it needs t be towed to a garage which they can do at no fee. however got budget to for this car as i also dont know any good garages that could touch it locally really.

Any my own tests:

at the back of the ignition barrel all the outlets go the battery voltage

battery full charged and used jumper so not an issue

fuses all seem okay below steering column and engine bay

fuel pump works and has fuel coming at the inlet pipe

the ignition is a bit odd, i tested few times and dont get anything but then get excellent spark continuously, not sure on that.

it has fuel, fresh fuel

when testing, its cranking, has fuel and spark but cant tell why it doesn't start.

i have tested the crank sensor lead (disconnected from the sensor and tested car loom side), it has voltage at the input , ground and it has 4v at the input what would be the input from the crank sensor (not sure if this is correct


any help would be much appreciated
im also really struggling to get proper wiring diagrams and manuals for my model

thank you
Ali

[Google]