The Mitsubishi Pajero Owners Club®

Kellys Hero

Hi
I am currently working on a 2004 3.2 Diesel SWB Shogun Warrior, which I intend to buy.
However, it has a traction control light on.
I have a Launch X431 Reader but the Mitsubishi lead does not fit as the lead needs to be a standard OBD 16-pin but also a 13-pin male to fit into the two sockets under the dash.

Apparently, this is the only year this type of plug is need on.

Question. Who has carried out a scan/check on there's and where did you get the cable/plug from, please?

NOTE both are female sockets on the OBD system fitted under the dash.

I appreciate I can earth out the pin, to get a code, but I want a proper lead, please.

Google · Sponsor

iam_TJ · Posted: Sat May 20, 2023 9:43 Post subject:

The 'first' socket is standard OBD 2 ( slope-sided 16-pin code D-23 in wiring diagrams); The second socket (rectangular 12-pin code D-22 in wiring diagrams) used by MUT (the Mitsubishi Diagnostic Tool) has pin 26 from the engine ECU and pin 27 from the automatic transmission ECU.

iam_TJ · Posted: Sat May 20, 2023 9:47 Post subject:

I should have mentioned that D-22 has 12 pin lugs in a 7x2 (14 pin) connector. The connector has this organisation (front side view):

Kellys Hero · Posted: Sat May 20, 2023 11:35 Post subject:

iam_TJ · Posted: Sat May 20, 2023 17:01 Post subject:

As far as I know pins 26 and 27 are MUT specific; but you'd need to ask your diagnosis tool supplier.

iam_TJ · Posted: Sat May 20, 2023 17:11 Post subject:

This is a photo of the MUT cable, with ODB lower left, 'custom' 2x7 top-left, and MUT 43-pin D-sub connector right.

http://obd2toolz.com/image/cache/data/EA1008-17-500x500.jpg