View previous topic :: View next topic |
Author |
Message |
mooseman *
Age: 53 Zodiac: Joined: 08 Apr 2006 Posts: 13 Location: charmouth dorset
|
Posted: Tue May 15, 2007 21:40 Post subject: please help fellow paj owner |
|
|
before i start im sorry if you all get sick of these questions but here goes. 1) how high can i lift my 2.8 lwb and where can i buy the stuff? 2) i need a snorkel and cant find one anywhere any ideas? and want and need to put a winch on but everyone only seems to ceal with land rover!! many thanks guys |
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue May 15, 2007 21:40 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
unclepoo ****
Age: 57 Zodiac: Joined: 16 Apr 2007 Posts: 446 Location: wakefield
|
Posted: Tue May 15, 2007 23:58 Post subject: |
|
|
Hi mooseman
Lifting the front end is easy
tighten up the tortion bars running from the front to a point level with the b pilars on a lwb.....you`l need a 17mm socket and a 17mm open ended spanner.....hold the lock nut above with the spanner n get turning from below with the socket....2" is about the limit.
Easy ....Poo |
|
Back to top |
|
|
cssuk *******
Age: 57 Zodiac: Joined: 29 Dec 2004 Posts: 2977 Location: UK
|
Posted: Wed May 16, 2007 0:02 Post subject: |
|
|
lifting how much you want to spend as above or full kit 2" approx 450
snorkel 199 deliv to your door
winch arb bullbar 465 inc vat plus a winch |
|
Back to top |
|
|
ukrabbiter ********
Age: 55 Zodiac: Joined: 20 Apr 2005 Posts: 5728 Location: Halifax, West Yorkshire
|
Posted: Wed May 16, 2007 0:18 Post subject: |
|
|
If you want to go higher than the 2", pipes & stuff need extending, but there are some about with 10" lift |
|
Back to top |
|
|
craigderby **
Age: 49 Zodiac: Joined: 13 Mar 2007 Posts: 90 Location: DERBY
|
Posted: Wed May 16, 2007 16:31 Post subject: |
|
|
cssuk wrote: |
snorkel 199 deliv to your door
|
Where from? The one's I've seen have been much more than that |
|
Back to top |
|
|
mooseman *
Age: 53 Zodiac: Joined: 08 Apr 2006 Posts: 13 Location: charmouth dorset
|
Posted: Wed May 16, 2007 17:38 Post subject: |
|
|
thanks guys realy want to go 3 inch lift front and rear and can you please send me the address for snorkels and winch ect? id realy welcome your help.
jamie |
|
Back to top |
|
|
Colin. ****
Joined: 12 Oct 2002 Posts: 341 Location: Near Dornoch, Highlands.
|
Posted: Wed May 16, 2007 20:06 Post subject: |
|
|
You will get all the bits from Frogsisland 4x4 they have a website. |
|
Back to top |
|
|
Tazman ****
Joined: 14 Jan 2004 Posts: 270 Location: norfolk
|
Posted: Wed May 16, 2007 20:23 Post subject: |
|
|
Have to agree with Craigderby, where can you get a snorkel delivered to your door for less than 200 quid? Cheapest I have found is 230 +VAT and delivery
Tazman |
|
Back to top |
|
|
cssuk *******
Age: 57 Zodiac: Joined: 29 Dec 2004 Posts: 2977 Location: UK
|
Posted: Wed May 16, 2007 22:08 Post subject: |
|
|
i would tell you but the admin wont let me email me if you want to know
3" front 4" rear 33" tyres and a snorkel |
|
Back to top |
|
|
rick the biker LifeTime Member
Age: 53 Zodiac: Joined: 21 Aug 2006 Posts: 822 Location: HECKMONDWIKE
|
Posted: Thu May 17, 2007 22:34 Post subject: |
|
|
looks good..but..but im guessing its a pretty big hole you need to make in the outer and inner wing? |
|
Back to top |
|
|
rick the biker LifeTime Member
Age: 53 Zodiac: Joined: 21 Aug 2006 Posts: 822 Location: HECKMONDWIKE
|
Posted: Thu May 17, 2007 22:35 Post subject: |
|
|
oh yeah..wont it draw in water in the rain/snow too?? |
|
Back to top |
|
|
cssuk *******
Age: 57 Zodiac: Joined: 29 Dec 2004 Posts: 2977 Location: UK
|
Posted: Thu May 17, 2007 22:52 Post subject: |
|
|
no the holes about 3.5 inch across the cap of the snorkel has a water seperator built in as do the safari ones |
|
Back to top |
|
|
|