The Mitsubishi Pajero Owners Club®

joemaxi · Posted: Tue Feb 15, 2011 16:49 Post subject: Boost Gauge

Could someone be kind enough to post a pic of which pipe to put the T-Piece in
on a 1995 2.8, in order for the boost gauge to function.

i cant seem to find one via the search function Embarassed

John

Google · Sponsor

NYRA · Posted: Tue Feb 15, 2011 17:27 Post subject:

http://www.pocuk.com/forums/viewtopic.php?t=121963

joemaxi · Posted: Tue Feb 15, 2011 20:32 Post subject:

Thanks for the link, however, thats on a 2.5 is a 2.8 in the same place?

John.

NYRA · Posted: Tue Feb 15, 2011 20:36 Post subject:

would of thought so mate..

El Ricko · ******** Joined: 12 May 2008 Posts: 5453 Location: UK

on a 2.8 find the wastegate actuator on the turbo and put the 't' in to that hose, or if you have brought the hose out behind the battery 't' into the presure hose going to the top of the injector pump

joemaxi · Posted: Wed Feb 16, 2011 19:38 Post subject:

Thanks Iain,

yes, the hose is routed from behind the battery, it will have to be the one on the pump
the pipe i have is black 5mm stuff, is that too small?
the guy in shop said it was vacuum pipe
should i switch to washer diameter pipe?

regards
John.

El Ricko · ******** Joined: 12 May 2008 Posts: 5453 Location: UK

joemaxi · Posted: Wed Feb 16, 2011 20:29 Post subject:

Thanks for the swift reply,
any chance if you get a minute you could post a pic
i wouldnt know a boost enrichment device from a shirt button Embarassed

will also go and get some waher pipe tomorrow Laughing

regards

John.

El Ricko · ******** Joined: 12 May 2008 Posts: 5453 Location: UK

joemaxi · Posted: Fri Feb 18, 2011 19:43 Post subject:

Thanks Iain Laughing

As Jim Bowen would say "Super, Smashin"

will get the hose from halfords tomorrow and fit it late afternoon.
The stuff i have at the moment is too small at 5mm.
Have also sorted my oil pressure gauge, with an adaptor onto the oil pressure take off,
Gauge is working fine and reads between 90 and 100 degrees.
Hopefully by Sunday i will have all 3 ralliart gauges fully functional

John.