The Mitsubishi Pajero Owners Club®

stibbs · **** Joined: 14 Mar 2005 Posts: 290 Location: Bradford

ive moved my heater controls to where your cd changer is on yours gazz1zz
if i was u id remove the changer etc and put your heater controls there and just add a dvd player like i have done
i got mine off fleebay for £70 it plays dvd/mp3/mp4/j.peg has sd card slot usb slot works a treat

u can buy rca splitters from maplins so u can add 2 sets of rca leads to the tv tuner
thats what i have done on mine just not sure what else to add lol

leee i pm u about the wire u cut so u can use the screen on the move cant seam to figure it out
any ideas
i cut the white/blue wire on the back of the jap radio but it still goes off when u drive

Google · Sponsor

GAZZ1ZZ · Posted: Wed Jun 04, 2008 13:16 Post subject:

Nice one ... when moving the heater controls do you have to chop or add any wiring for them to reach the new location ?

leee · Posted: Wed Jun 04, 2008 14:53 Post subject:

Stibbs

with regards to the wiring, i dont think it comes from the radio to turn the screen off/on. there is probably a wire going to the screen which needs attention.

it is either always 12v and turns off when driving or its 0v and turns on when driving. hope that makes sense. if its the latter then the wire needs to be cut, if the former then it needs cutting and 12v applied to it from another source.

i have to strip mine out soon becuase i want to check something. if i have time ill run a meter over the connections to see which one it is, but because i dont have the tv tuner/button then it may be immpossible for me to check.

gazz

heater controller just unplugs then plugs back in but make sure the pipe that goes to it is reattached.

stibbs · **** Joined: 14 Mar 2005 Posts: 290 Location: Bradford

if u look at that site u posted in the other thread about pinouts
it tells u to cut the vss wire and thats on the radio plug
but i did that and it still goes off

stibbs · **** Joined: 14 Mar 2005 Posts: 290 Location: Bradford

http://mmcs.mylivepage.com/wiki/516/425_Composite_video_input_(VTR)_unlocking_

leee · Posted: Wed Jun 04, 2008 18:12 Post subject:

thats a different system, with a different screen. also i dont think the wire that is cut is going to the radio, it could either be the navi control or the screen.

stibbs · **** Joined: 14 Mar 2005 Posts: 290 Location: Bradford

if u look at the pinout page the vss wire is on the radio plug

GAZZ1ZZ · Posted: Wed Jun 04, 2008 19:05 Post subject:

leee · Posted: Wed Jun 04, 2008 19:23 Post subject:

also on the navi control pinout

but i wouldnt trust these drawings for your system

stibbs · **** Joined: 14 Mar 2005 Posts: 290 Location: Bradford

so it is lee i never saw that before lol
ill have a look at it tomoz

stibbs · **** Joined: 14 Mar 2005 Posts: 290 Location: Bradford

is that the navi unit under the seat?
i thought it would be on the screen

stibbs · **** Joined: 14 Mar 2005 Posts: 290 Location: Bradford

hey leee
did u have a look at the wire u have to cut to get tv on the move?

stevehughes · Posted: Fri Aug 29, 2008 10:09 Post subject:

hi , i have just bought a 98 pajero exceed which comes complete with the sat nav tv etc , can anyone tell me were about i would find the tv tuner as i have a reversing camera i want to install any hepl would be appreciated. I am new on here not sure of my way round yet

Thanks

Steve

GAZZ1ZZ · Posted: Fri Aug 29, 2008 10:53 Post subject:

Hi Steve, not sure about the 98 model mate, but mine is hiden behind the rear quater panel plastics in the boot passenger side Wink

Hope this helps

stevehughes · Posted: Fri Aug 29, 2008 10:55 Post subject:

thanks for that will have a look but me thinks the tv tuner may not be fitted as when i press the tv button nothing happens but hey will have a look anyway, Its a P reg exceed model