The Mitsubishi Pajero Owners Club®

[Oldskool Beat]

First job is to remove the 4 bolts securing the Intercooler, Its not totaly necessary to remove, but makes it a lot easier to get to the pullies

Remove the 4 Bolts and move the Intercooler to the left hand side of the engine



Loosen off the locking bolt on the centre of the pully and then loosen the adjuster bolt until belt slackens



Loosen off the forward facing locking bolt and then loosen the adjuster bolt (Hidden behind the top hose) until belt slackens


You should now be able to remove all the belts and replace as required. 8)
On refitting the belts adjust as required and then do up the locking bolts, refit Intercooler and check all connections (you wouldn't like the intercooler fan to fail )

Its as easy as that 8)


I will not be held responsible for any 'misfortunes' in carry out the job.
Its not my trade, just trying to help

[Google]

[HarryJAllastars]

As ever, oldskool, your contributions are spot on.

Excellent pictures to work from.

Seán

[Oldskool Beat]

Thanx Sean,
Took longer sorting out pics etc than doing the bloody job

[drew]

nice pics!!. far easier when someone can provide quality images.
surely everyone will print these. ten out of ten ..
just mind out for skinned knuckles and dont drop anything!

regards andy..